A rigorous expansion:
The new multi-point locking system around the corner

A rigorous expansion:
The new multi-point locking system around the corner

just scroll

down-jump

"Especially in places where vandalism or unauthorized access are a threat, vertical and horizontal locking systems are called for.

With our rigorous expansion of the compression rod latch, secure locking is ensured even for large doors through multiple locking points on two axes. In addition, the contact pressure is evenly applied over the entire frame."

Thomas Pohlmann, Product Coordinator

"Especially in places where vandalism or unauthorized access are a threat, vertical and horizontal locking systems are called for. With our rigorous expansion of the compression rod latch, secure locking is ensured even for large doors through multiple locking points on two axes. In addition, the contact pressure is evenly applied over the entire frame."

Thomas Pohlmann, Product Coordinator

Secure, convenient and flexible.

Secure and comfortable locking thanks to compression.

  • Even sealing pressure thanks to compression of 4 mm
  • Multi-point locking possible for optimal compression around the corner, even for large doors
  • Stroke 23 mm

Flexible application.

  • Installation within the sealing range for better maneuverability
  • The connecting rods between the compression elements are simply fastened in the clamps
  • Clamps to fasten round or flat rods
  • RH and LH version
    Tolerance compensation possible thanks to oblong holes
  • Usable with swinghandles PrC, closing and opening angle 135°

Special advantages from the re-direction.

  • Control of compression elements around the corner (horizontal / vertical)
  • Full-value locking point with compression
  • Installation analogous to assembling of compression rod latches using one rod

1. By turning the swinghandle by 90°, the cam is brought to the locked position.

2. By turning the swinghandle a further 45°, the cam is pressed by 4 mmagainst the clamping surface.

Cam pivoted by 65°.

90° re-direction
Is also used as latching point
For multi-point compression locks around the corner


Material

Housing, rods, clamps, pinion: zinc die

Re-Direction, RH version

Product System Door-part Feature Stroke Part-Number Link
3-315 a) screw-on top 23 mm 208-9091.00-00000
b) screw-on bottom 23 mm 208-9090.00-00000

Re-Direction, LH version

Product System Door-part Feature Stroke Part-number Link
3-215 a) screw-on top 23 mm 208-9090.00-00000
b) screw-on bottom 23 mm 208-9082.00-00000

Contact

Imprint

DIRAK Dieter Ramsauer
Konstruktionselemente GmbH
Königsfelder Straße 1
58256 Ennepetal
Deutschland

Tel.: +49 (0) 2333 / 837-0
Fax: +49 (0) 2333 / 837-103
Email: info[at]dirak.de


Represented by:
Dieter Ramsauer,
Burkhard Bünis,
Karl-Heinz Overhamm
Chairman of the Board of Directors:
Detlef Erlenbruch


Entered in the trade register  
Commercial Register AG Hagen,
HRB 7977
Sales Tax ID Number (VAT No.)
DE 261 585 314
Last update: June 2014

DIRAK.com

The DIRAK Assortment with more than 4.500 products you can find on our Homepage.

Authorized Distributor Of Leading Locking And Hinging Solutions Made by DIRAK

Flexicel

Flexicel