LAUNCH

Exact adjustment to your dimensions with the components of this tool-less height-adjustable locking system

01 Requirements

“Whoever would like to use a locking system flexibly is subject to the height-adjustability of the product.

This is why we have developed various components for a height-ad- justable locking system, placing the focus on fexibility, high quality and convenient use.”

Cem Olkay, Head of Development & Construction

02 Product system

1-191SL Rod guide with knurled wheel
Height-adjustable, with adjustment up to 8mm

2-151.01SL Adjustable 3-point cam adapter with knurled wheel
Height-adjustable, for 3-point locking

1-100.02 Quarter-Turn with square threaded rod
Height-adjustable, available with seven inserts

2-092 Swinghandle with square threaded rod
Height-adjustable

03 Product benefits

1-191SL Rod guide with knurled wheel

Locking systems can be installed pre-assembled as the rod guide will only be pushed onto the knurled nut. As the nut is screwd on the stud the rod guide is movable and removable. Manufacturing tolerances or setting of the sealing can always be compensated by the height-adjustable rod guide. Also suitable for short rods in combination with 2-point and 3-point cam as the round shape allows free swivelling.

  • Rod guide is pushed onto the knurled nut and can be installed therefore pre-assembled
  • Tool-less adjustment with knurled nut
  • Dismantling of the rod for height adjustment not necessary
  • Usable for studs M6 from 14 to 21mm
  • Adjustment range up to max. 8mm
  • RH / LH application
  • Rod guide with swivel joint
  • Clip-in swivel joint

2-151.01SL Adjustable 3-point cam adapter with knurled wheel

The adjustable 3-point cam adapter with knurled wheel can be used for M10 square threaded rods. It is applicable for swinghandles and quarter-turns.

  • 3-Point cam adapter adjustable
  • Usable with standard cams
  • Tool-less adjustment because of the knurled wheel
  • Vibration-proof
  • Knurled wheel with M10 thread
  • 3-point locking system

1-100.02 Quarter-Turn with square threaded rod

  • RH / LH application
  • Square threaded rod 40mm
  • Grounding by grounding nut or clip
  • IP 65 according to DIN EN 60529
  • Quarter-Turn pre-assembled without cam
  • Adjustability of the cam by the catch for standard cams 2-151.02SL and 3-point cam adapter with knurled wheel 2-151.01SL

2-092 Swinghandle with square threaded rod

  • For right and left applications
  • Square threaded rod 40 mm for adjustable single or 3-point cams
  • Adjustability of the cam by the catch for standard cams 2-151.02SL and 3-point cam adapter with knurled wheel 2-151.01SL
  • Readjustment possible with knurled wheel (e.g compressed sealing)
  • Pre-assembled without cam
  • IP65 according to DIN EN 60529

04 Dimensions / Order options

1-191SL Rod guide with knurled wheel

Material

PA, black

Product system Description Material Adjustable range Scope of supply Link
1-191SL Rod guide with knurled wheel PA max. 8mm 10 pcs. https://dirak.com/en/products/accessories-quarter-turn/1-191_height-adjustable-rod-guide-with-knurled-nut

2-151.01SL Adjustable 3-point cam adapter with knurled wheel

Material

Zinc die, zinc plated

Product system Description Surface Part number Link
2-151.01SL Adjustable 3-point cam adapter with knurled wheel Zinc die 200-9632 https://dirak.com/en/products/accessories-swinghandles/2-151-01_3-point-cam-adapter-adjustable

1-100.02 Quarter-Turn with square threaded rod

Material

Housing: Zinc die, chrome plated
Insert: Zinc die, nickel-plated
Nut: Steel, zinc plated
Grounding nut: Zinc die, zinc plated
Grounding clip: Stainless Steel

Product system Description Insert type Grounding tyoe Housing length Part number Link
1-100.02 Quarter-Turn with square threaded rod Square 7 L18 100-9801.00-11940 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
1-100.02 Quarter-Turn with square threaded rod Square 8 L18 100-9801.00-12040 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
1-100.02 Quarter-Turn with square threaded rod Triangular 7 L18 100-9801.00-12140 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
1-100.02 Quarter-Turn with square threaded rod Triangular 8 L18 100-9801.00-12240 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
1-100.02 Quarter-Turn with square threaded rod Double bit 3 L18 100-9801.00-12340 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
1-100.02 Quarter-Turn with square threaded rod Double bit 5 L18 100-9801.00-12440 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
1-100.02 Quarter-Turn with square threaded rod Hex. SW 11 L18 100-9801.00-12540 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
1-100.02 Quarter-Turn with square threaded rod Square 7 Grounding nut L18 100-9802.00-11940 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
1-100.02 Quarter-Turn with square threaded rod Square 8 Grounding nut L18 100-9802.00-12040 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
1-100.02 Quarter-Turn with square threaded rod Triangular 7 Grounding nut L18 100-9802.00-12140 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
1-100.02 Quarter-Turn with square threaded rod Triangular 8 Grounding nut L18 100-9802.00-12240 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
Product system Description Insert type Grounding tyoe Housing length Part number Link
1-100.02 Quarter-Turn with square threaded rod Double bit 3 Grounding nut L18 100-9802.00-12340 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
1-100.02 Quarter-Turn with square threaded rod Double bit 5 Grounding nut L18 100-9802.00-12440 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
1-100.02 Quarter-Turn with square threaded rod Hex. SW 11 Grounding nut L18 100-9802.00-12540 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod 
1-100.02 Quarter-Turn with square threaded rod Square 7 Grounding clip L18 100-9803.00-11940 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
1-100.02 Quarter-Turn with square threaded rod Square 8 Grounding clip L18 100-9803.00-12040 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
1-100.02 Quarter-Turn with square threaded rod Triangular 7 Grounding clip L18 100-9803.00-12140 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
1-100.02 Quarter-Turn with square threaded rod Triangular 8 Grounding clip L18 100-9803.00-12240 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod 
1-100.02 Quarter-Turn with square threaded rod Double bit 3 Grounding clip L18 100-9803.00-12340 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
1-100.02 Quarter-Turn with square threaded rod Double bit 5 Grounding clip L18 100-9803.00-12440 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod
1-100.02 Quarter-Turn with square threaded rod Hex. SW 11 Grounding clip L18 100-9803.00-12540 https://dirak.com/en/products/quarter-turn/1-100.02_quarter-turn-with-square-threaded-rod

2-092 Swinghandle with square threaded rod

Material

Square threaded rod: Zinc die, zinc plated
Bearing plate: PA, black

 

Contact






    DIRAK GmbH –
    A Member of DIRAK Group

    DIRAK Dieter Ramsauer
    Konstruktionselemente GmbH
    Königsfelder Straße 1
    58256 Ennepetal
    Germany

    Phone: +49 (0) 2333 / 837-0
    Fax: +49 (0) 2333 / 837-103
    Email: info@dirak.de

    Imprint

    DIRAK Dieter Ramsauer
    Konstruktionselemente GmbH
    Königsfelder Straße 1
    58256 Ennepetal
    Germany

    Phone: +49 (0) 2333 / 837-0
    Fax: +49 (0) 2333 / 837-103
    Email: info@dirak.de

    Represented by:
    Jens Boche

    Entered in the trade register
    Commercial Register AG Hagen,
    HRB 7977
    Sales Tax ID Number (VAT No.)
    DE 261 585 314
    Last update: June 2023